EQUIPMENT CO. INC.

(281) 458-8891

Table Top Rolls

 

 

 

BEC-PR-1 Table Top Power Turning RollsBEC PR 1 Top Power Turning Rolls

Weight Capacity

1,000 Lbs.

Turning Capacity

1,000 Lbs.

Drive

Friction drive with knurled steel drive roller against 6” diameter wheels w/2” width, 90 Durometer hard rubber for positive grip and longer roller life.

Speed

2-46 Surface inches per minute of travel

Tractive Pull

350 Lbs.

Power Requirements

115 v, 60 Hz, AC power, heavy duty foot switch w/guard

These are the perfect companion for all fitters and welders. At approximately 60 pounds for the power and 30 pounds for the idler, they are very portable and will accommodate 2” to 18” pipe sizes.Overload Discs

 

Welding Postioner

 

 

 

BEC P 20000 Welding PositionerBEC P-20000 Welding Postioner

BEC P 250 Welding Positioner

BEC P-250 Welding Positioner

 

Positioner Model

Description

P-250

250 Lbs. @ 6” CG

P-500

500 Lbs. @ 6”CG

P-1000-6

1000 Lbs. @ 6” CG

P-1500-6

1500 Lbs. @ 6” CG

P-2000-6

2000 Lbs. @ 6” CG

P-2500-6

2500 Lbs. @ 6” CG

P-3000-6

3000 Lbs. @ 6” CG

P-3000-12

3000 Lbs. @ 12” CG

P-4000-6

4000 Lbs. @ 6” CG

P-4500-12

4500 Lbs. @ 12” CG

P-6000-6

6000 Lbs. @ 6” CG

P-6000-12

6000 Lbs. @ 12” CG

P-10000-12

10000 Lbs. @ 12” CG

15’ Remote pendant is standard on ALL Positioners of 1000 lbs. or more. Longer lengths available at an additional charge.

 

Technical Specifications
Model Basic Load Capacity ECC Center Of Gravity Inherent Over-Hang Rotation Torque Inch Pounds Tilt Torque Inch Pounds Motor Tilt HP Table RPM Variable Speed Table Size Radial Slots Bolt Size
P-250 250 6” 4” 5 1,500 N/A N/A 8-Jan .20-2.5 16” 3 EA. ½”
P-500 500 6” 6” 6 3,200 7,500 ¼ ¼ .20-2.5 24” 3 EA. ½”
P-1000 1,000 6” 6” 6 9,800 19,000 ½ 3-Jan .05-1.2 30” 4 EA. ½”
P-1500 1,500 6” 6” 6 15,000 19,000 ½” ½” .05-1.2 30” 4 EA. 5/8”
P-2000 2,000 6” 6” 6 15,000 24,000 ½” ½” .05-1.2 30” 4 EA. 5/8”
P-2500 2,500 6” 6” 6.25 30,000 47,500 ¾ ¾ .02-1.1 30” 4 EA. 5/8”
P-3000 3,000 6” 6” 6.5 28,700 37,500 ¾ ¾ .02-1.1 32” 4 EA. 5/8”
P-3000 3,000 12” 12” 7.5 37,500 58,500 1 ½ 1 .02-1.2 36” 4 EA. 5/8”
P-4000 4,000 6” 6” 6.5 28,000 50,000 1 1 0.2-1.2 36” 4 EA. ¾”
P-4500 4,500 12” 12” 9 54,000 94,500 2 1.5 .04-1.0 36” 4 EA. ¾”
P-6000 6,000 12” 12” 9 72,000 128,000 3 2 .01-0.9 52” 4 EA. ¾”
P-10k 10,000 12” 12” 9 120,000 220,000 5 3 .01-.92 54” 4 EA. ¾”

 

For your capacities and optional extras – consult factory

 

Description Model/Part Number
Footswitch Control for ALL Models
6” 3 Jaw Chuck - Mounted BEC-063
8 “ 3 Jaw Chuck - Mounted BEC-083
12” 3 Jaw Chuck – Mounted BEC-123
15” 3 Jaw Chuck - Mounted BEC-153
10” Turn Potentiometer BEC-10-TPP

Larger sizes through 24,000 lbs. @ CG are available upon request


Copyright © 2017. All Rights Reserved.