Line-Up Mandrel
“Quick-Stab” mandrels for 2” through 8” Schedule 10 through 80 pipe for Fit/Tack/Weld of pipe-to-pipe; pipe-to-flange “Quick-Stab” maintains concentric alignment of parts.
Increased Production Features:
- Fast & exact line-up for tack operation
- Only one operator required
- Reduces operator fatigue
- Reduces rejects
- Eliminates Out-of-Round
- Built-In level indicator
- Increase production of small runs by 100%
- Increase large run productions by 1,000%
- Self-compensating for assemblies with different ID boxes.
Quality Features:
- Eliminates jack stand support
- Self-squaring & leveling built into each unit
- Requires standard shop air (70-125 psi)
- “Quick Stab” LUM is very portable; self- contained and does not require a separate booster assembly.
- Simple maintenance – clean & lube
- Jaws are Replaceable/Interchangeable
- Comes with hardened anodized aluminum jaws, available in steel & stainless steel.
- Special bore sizes & mandrel lengths are available.
- Rugged design and durable construction provides years of reliable service.
Model LM-3/4 is furnished with 3 and 4” jaws.
Model LM-6/8 is furnished with 6 and 8” jaws.
Model |
Size Range |
Weight |
Description |
BEC LM-2 |
2” |
15 Lbs |
2” Line-Up Mandrel |
BEC LM-3/4 |
3 – 4” |
18 Lbs |
3- 4” Line-Up Mandrel |
BEC LM-6/8 |
6 – 8” |
22 Lbs |
6 – 8” Line-Up Mandrel |
Model |
Description |
LMJSS-2 |
2” stainless steel Line-Up mandrel |
LMJSS – ¾ |
3 - 4” stainless steel Line-Up mandrel |
LMJSS – 6/8 |
6 – 8” stainless steel Line-Up mandrel |
LMJCS – 2 |
2” carbon steel Line-Up mandrel |
LMJCS – ¾ |
3 – 4” carbon steel Line-Up mandrel |
LMJCS – 6/8 |
6 – 8” carbon steel Line-Up mandrel |
All BEC “Quick Stab” Line-Up mandrels are furnished with hard-anodized aluminum jaws. Matched replacement jaws are installed at the factory.
Head & Tailstock
Model |
Load Cap. |
Center of Gravity |
Rotational Torque |
Motor HP |
Constant RPM Speed |
Table Size |
HS-25 |
2,500 |
6” |
15,000 IN LBS |
½ |
1.80 |
32” |
HS-50 |
5,000 |
12” |
60,000 IN LBS |
1.0 |
0.92 |
42” |
HS-120 |
12,000 |
12” |
140,000 IN LBS |
3.0 |
0.92 |
54” |
Tailstock positioners have the same specifications as headstock positioners except, no provision for power.
Model |
Capacity |
Other |
TS-25 Tailstock |
2,500 Lbs |
Use With HS-25 |
TS-50 Tailstock |
5,000 Lbs |
Use With HS-50 |
TS-120 Tailstock |
12,000 Lbs |
Use With HS-120 |
Texas Jacks BEC-TJK-10
BEC-TJK-10
Texas Jack (Power Roll)
Wt. Capacity – 10,000 LBS.
Turning Capacity – 30,000 LBS.
BEC-TJ-10
Texas Jack (Idler Roll)
Wt. Capacity 10,000 LBS.
Each power unit comes with a 15’ control pendant and has direct gear-to-gear drive for smooth dependable transmission of power. Electrical will be set up to meet your needs.
Optional:
Heavy duty footswitch – Variable speed
Texas Jacks BEC-TJK-30
BEC-TJK-30
Texas Jack (Power Roll)
Wt. Capacity – 30,000 LBS.
Turning Capacity – 30,000 LBS.
BEC-TJ-30
Texas Jack (Idler Roll)
Wt. Capacity 30,000 LBS.
Each power unit comes with a 15’ control pendant and has direct gear-to-gear drive for smooth dependable transmission of power. Electrical will be set up to meet your needs.
Optional:
Heavy duty footswitch – Variable speed
BEC-PR-30 Power Turning Rolls
Weight Capacity |
30,000 Lbs. |
Turning Capacity |
90,000 Lbs. 4” diameter and up. |
Drive |
Direct couple positive drive via double reduction and single gear-to-gear drive. |
Speed |
5” to 50” surface speeds standard with SCR control. |
Power Requirements |
230V, 60 Hz, AC Power |
Includes 15’ Remote pendant |
|
Optional – 115/460 V Power; Steel Wheels |
Models |
|||||||||
Description |
|
PR-1 |
PR-3 |
PR-3F |
PR-5 |
PR-10 |
PR-20 |
PR-30 |
PR-60 |
Weight Capacity (In Lbs) |
1,000 |
3,000 |
3,000 |
5,000 |
10,000 |
20,000 |
30,000 |
60,000 |
|
Turning Capacity (Conc. Load) |
1,000 |
4.5 Tons |
4.5 Tons |
7.5 Tons |
15 Tons |
30 Tons |
45 Tons |
90 Tons |
|
(1) Power & (1) Idler Roll |
1,000 |
3 Tons |
3 Tons |
5 Tons |
10 Tons |
20 Tons |
30 Tons |
60 Tons |
|
(1) Power & (2) Idler Rolls |
1,000 |
4.5 Tons |
4.5 Tons |
7.5 Tons |
15 Tons |
30 Tons |
45 Tons |
90 Tons |
|
Var Speed DC Drive w/SCR control remote pendant |
¼ HP |
¼ HP |
¼ HP |
½ HP |
¾ HP |
1 ½ HP |
2 HP |
3 HP |
|
Surface speed (IPM) |
5-50 |
8-80 |
8-80 |
6.1-61 |
6.4-64 |
5-50 |
4.8-43 |
5-50 |
|
Work Diameters |
1 ½ - 16” |
2 3/8- 72” |
2 3/8-24” |
4 – 96” |
4-156” |
4-168” |
8-216” |
8-216” |
|
Approx. Shipping Weight (In Lbs) Pwr/Idle |
65 40 |
500 250 |
200 100 |
800 400 |
1050 500 |
1550 750 |
2100 1080 |
4300 2800 |
Turning roll should always be the same make & type with the same wheel diameter. Insure that installation is on a smooth hard, level, preferably steel floor. Do Not Anchor! Free floating gives best contact to working piece. Support load with min. Idlers- multiple units absorb power. Improper alignment absorbs power. Always use shortest center distance sitting between wheels that will safely handle the size & diameter.
Model |
Description |
BEC-PR-1 |
500 Lb Wt Cap. DC Drive Power Rolls; 1,000 Lb Turn Cap |
BEC-IR-1 |
500 Lb Idler Roll |
BEC-PR-2 |
2,000 Lb Wt Cap. DC Drive Power Rolls; 6,000 Lb Turn Cap. |
BEC-IR-2 |
2,000 Lb Idler Roll |
BEC-PR-3 |
3,000 Lb Wt Cap. DC Drive Power Rolls; 9,000 Lb Turn Cap. |
BEC-IR-3 |
3,000 Lb Idler Roll |
BEC-PR-5 |
5,000 Lb Wt Cap. DC Drive Power Rolls; 15,000 Lb Turn Cap. |
BEC-IR-5 |
5,000 Lb Idler Roll |
BEC-PR-10 |
10,000 Lb Wt Cap. DC Drive Power Rolls; 30,000 Lb Turn Cap. |
BEC-IR-10 |
10,000 Lb Idler Roll |
BEC-PR-20 |
20,000 Lb Wt Cap. DC Drive Power Rolls; 60,000 Lb Turn Cap. |
BEC-IR-20 |
20,000 Lb Idler Roll |
BEC-PR-30 |
30,000 Lb Wt Cap. DC Drive Power Rolls; 90,000 Lb Turn Cap. |
BEC-IR-30 |
30,000 Lb Idler Roll |
BEC-PR-60 |
60,000 Lb Wt Cap. DC Drive Power Rolls; 180,000 Lb Turn Cap. |
BEC-IR-60 |
60,000 Lb Idler Roll |
It is common to order Power & Idler Rolls by capacity in tons.
EXAMPLE: “We are looking for a 5 ton power roll.” “Tonnage” commonly reflects the use of (1) Power and (1) Idler Roll, thus the use of a PR-5 and an IR-5 would be a “5 ton set”.